Cart Overview

There are no items in your shopping cart

Sonifex RB-HD6

Headphone Distribution Amplifier
1 option selected

(0 reviews)

Up to 6 headphones can be distributed or controlled independently with this product.

Product Options

RB-HD6 $558.00
RB-HD6 (115Volt Version) $558.00
  • Meet the needs for up to 6 separate headphone users or amplifiers with the red box Sonifex Headphone Amplifier

    The RB-HD6 headphone distribution amplifier is a 1U rack-mount which distributes stereo audio to up to 6 different sets of headphones, or can be used as 6 independent headphone amplifiers, each with their own input and volume control. A typical application might be to provide common headphone feeds for guests in a radio studio, with a separately derived feed, perhaps including talk-back, for the presenter.

    The main stereo input is on XLR-3 connectors on the rear panel which are electronically balanced and can be wired unbalanced. A stereo/mono input select switch on the rear panel sums left and right outputs to provide a mono feed to the headphones.

    The unit can receive an override audio signal via a jack socket for each output channel. Plugging in the jack plug will divert the headphone output from the master audio signal to the audio present on the jack plug. The override audio inputs can also be individually configured as parallel outputs, by setting internal jumpers.

    The master volume control adjusts overall level of the 6 outputs and does not affect the level of channels using the override inputs. The master volume can be disabled by internal jumpers.

    Please select the variant from the product options.

    Audio Specification
    Maximum Input Level +28dBu
    Input Impedance >20kohm balanced bridging (main), 10kohm unbal override
    Output Level Drives 150mW into 32-600ohm headphones
    Volume Control -60dB to +18dB gain
    Input Gain Range -12dB to +20dB gain (preset pots)
    Main Stereo Inputs 2 x XLR 3 pin female (balanced, can be unbalanced)
    Outputs 2 x 0.25" (6.3mm) A/B gauge 3-pole stereo jack sockets
    Remote Control 9-pin D-type socket
    Mains Input Filtered IEC, switchable 110-120V, or 220-240V, fused, 9W max
    Physical Specification
    Weight Nett: 1.35kg Gross: 2.0kg
    Dimensions Raw: 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U) Boxed: 53cm (W) x 20.5cm (D) x 6cm (H)
  • Review this product

    Please enter the characters shown in the image below:

Other Products You Might Like

Featured manufacturers

Please Wait