Cart Overview

There are no items in your shopping cart

D & R Hybrid 2

Telephone Interface
$497.00
Hybrid 2

(3 reviews)

The new D & R Hybrid 2 sets new standards in terms of quality affordable active hybrids.

Product Options

Hybrid 2 $447.00
$497.00
    • Active balanced interfacing
    • Variable High and low cut filters
    • Industry standard connectors
    • Superb audio separation
    • Externally adjustable R and C balance
    • Remote controllable
    • GPIO interfacing with mixing consoles

    The D&R Telephone Hybrid-2 concept originates from many demands for a more sophisticated hybrid with more features.

    The Telephone Hybrid-2 is an analog unit with digital control and features like ducking making intelligibility a lot better in broadcast. A large ring button enables you to to pick up the line from the unit itself or from your mixer when connected via its GPIO to the telephone Hybrid.

    Both levels of receive and send can be adjusted to suit your requirements. Incoming signals can be tailored by the variable high and low cut signal while talking to people calling the station. A switchable ducking system reduces the incoming signal while talking to people calling the station.

    Specifications
    Send
    Impedance 10k Ohm, electronically balanced
    Common mode rejection >40dB
    Maximum input level +26dBu
    Nominal input level +4 dBu
    Frequency response 20Hz – 15kHz (-3dB variable via HC and LC filters)
    Connectors XLR type 3 pin female
    Gain range receive control 40dB
    Receive
    Impedance < 50 Ohm, electronically balanced
    Common mode rejection >40dB
    Maximum output level +26dBu
    Nominal output level +4 dBu
    Bandwidth to telephone line 250Hz – 4kHz, -3dB ref 1 kHz
    Telephone line impedance Nominally 600 ohm
    Telephone line impedance range 300 ohm to 1500 ohm
    Connectors XLR type 3 pin male
    Gain range send control +6dB to –20dB
    General
    Distortion Less than 0.1% (0dBu out)
    Power supply 115v / 230 v AC / 50/60Hz (factory set, NOT do this yourself)
    Power consumption 10VA Maximum
    Dimensions 1 HE front panel: 482x44mm
    Frame: 430x41x175mm (width x height x depth)
    Weight 2.2 kg net excl packing
  • 4 starsi got more than 5 sets it works very well with out any problem since long time , good product . Bassam from Libya

    Anonymous visitor from Libya

    5 starsRecently purchased 2 Hybrid 2 telephone interfaces for use on a security project where a control room required speech to a number of remote sites, the transmission was via a VOIP gateway, the Hybrid did an excellant job of interfacing the systems. Great seperation of channels and easy to setup.

    Adrian

    4 starsGood product

    THAI from Vietnam

  • Review this product


Other Products You Might Like

Featured manufacturers

Please Wait