S2 is a new breed of radio broadcast mixer. Using the latest technology components, S2 offers digital audio quality with analogue reliability in a modular format. S2 has both AES/EBU digital and analogue input channels, together with simultaneous analogue and AES/EBU digital outputs.
Following on from the Sovereign range of audio mixers, S2 combines all the features needed of a radio broadcast mixer in a stylish, flush-mounting chassis : a wide range of input and output channels, PFL/cue, fader-start operation of equipment, automatic monitor muting on mic-live, light switching remote outputs, optional EQ on input modules, gram amp input options and 2 main audio buses, allowing you to broadcast on the PRG bus while recording on the AUD bus, with bus output selection on each module.
Innovative Design
- The S2 chassis is available in 5 module width sections, allowing 5, 10, 15, 20, 25 and 30 module width mixers. This means S2 can be used for small newsrooms or large on-air situations. An optional bus cable allows two mixers to be combined in a split-desk configuration.
- Modular "pop-up" input and output channels means that the mixer can be maintained simply and quickly. Input channels can be individually removed and repaired whilst still on-air.
- The angle of the meterbridge can be varied and set for best viewing position.
- Any module can be in any position so that customizing the mixer for your own purposes is easy.
- Large back-lit buttons allow you to see the status of the mixer at all times.
- The fitted rear panel hides all cable connections but can be simply unclipped and reclipped for maintenance.
- The modular design of the desk gives you the flexibility to expand it at a later date. You can even add another S2 mixer and link them together with a bus connector cable to allow for split desk configurations
Superb audio quality and unquestionable reliability
- The S2 uses the latest Crystal semiconductor technology to allow input and output of digital audio signals up to 24 bit, 96kHz sample rate.
- The analogue signal paths use low noise circuitry to provide superb audio performance well capable of satisfying radio listeners worldwide.
- The high reliability and build quality of S2 minimises the chance of failure, avoiding lost air-time. Each module is individually checked twice before being assembled into the finished chassis and the whole unit is tested before shipping.
- ALPS long throw 100mm faders give a smooth, repeatable response and the XLR Neutrik connectors used are an industry standard.
- The use of VCA's controlled by the faders ensures tight stereo tracking and eliminates mechanical and electronic noise.
- S2 has a separate 2U power supply providing regulated, ripple-free power to the mixer.
- High quality stainless steel is used for the chassis and screws to prevent corrosion in high humidity environments.
Penny and Giles Conductive Faders
- The input and output channels of an S2 mixer can optionally be fitted with high quality Penny & Giles faders.
Ordering options
We have a few pre-configured units available to order. These can be viewed on the Tabs above - which will show the List of modules in each pre-configured console.
Aletrnatively, just select the Quote me option, and email us the custom configuration you would like, we will be able to email you a quote for the custom option.
Sonifex S2-10
Comprising of the following modules:-
1 x S2-10 S2-10 cahnnel mixer chassis
1 x S2-PSU S2 Mixer power supply
1 x S2-ML53 S2 Meterbridge LED meter panel 53 Segment (3c wide)
1 x S2-MB3 S2 Meterbridge 3 channel width blanking plate
1 x S2-MB4 S2 Meterbridge 4 channel width blanking plate
5 x S2-CS S2 Dual Stereo Channel
2 x S2-CMM S2 Mic/Mic channel with EQ
1 x S2-ODA S2 Digital Output AUD channel
1 x S2-ODP S2 Digital Output PGM channel
1 x S2-OMC S2 Control room monitor channel
Sonifex S2-15
Comprising of the following modules:
1 x S2-15 S2 15 channel mixer chassis
1 x S2-PSU S2 Mixer power supply
1 x S2-MPPM S2 Meterbridge PPM meter panel (5c wide)
2 x S2-MB5 S2 Meterbridge 5 channel width blanking plate
6 x S2-CS S2 Dual Stereo Channel
3 x S2-CMM S2 Mic/Mic channel with EQ
1 x S2-CT S2 Telco channel with EQ
1 x S2-ODA S2 Digital Output AUD channel
1 x S2-ODP S2 Digital Output PGM channel
1 x S2-OMC S2 Control room monitor channel
2 x S2-CB S2 Blank channel
Sonifex S2-20
Comprising of the following modules:
1 x ha-20 S2-10 channel mixer chassis
1 x S2-PSU S2 Mixer power supply
1 x S2-MPPM S2 Meterbridge PPM meter panel (5c wide)
1 x S2-MB3 S2 Meterbridge 3 channel width blanking plate
3 x S2-MB4 S2 Meterbridge 4 channel width blanking plate
6 x S2-CS S2 Dual Stereo Channel
3 x S2-CMM S2 Mic/Mic channel with EQ
1 x S2-CT S2 Telco channel with EQ
1 x S2-ODA S2 Digital Output AUD channel
1 x S2-ODP S2 Digital Output PGM channel
1 x S2-OMC S2 Control room monitor channel
1 x S2-7SS S2 7 channle width script space
Sonifex S2-25
Comprising of the following modules:-
1 x S2-25 S2-25 channel mixer chassis
1 x S2-PSU S2 Mixer power supply
1 x S2-MPPM S2 Meterbridge PPM meter panel (5c wide)
1 x ST-ML S2 Meterbridge loudspeaker monitor panel
1 x S2-MT S2 meterbridge Timer panel (3c wide)
2 x S2-MB3 S2 Meterbridge 3 channel width blanking plate
2 x S2-MB4 S2 Meterbridge 4 channel width blanking plate
8 x S2-CS S2 Dual Stereo Channel
4 x S2-CMM S2 Mic/Mic channel with EQ
2 x S2-CT S2 Telco channel with EQ
1 x S2-ODA S2 Digital Output AUD channel
1 x S2-ODP S2 Digital Output PGM channel
1 x S2-OMC S2 Control room monitor channel
1 x S2-7SS S2 7 channel script space
1 x S2-CB S2 Blank channel
view
Anonymous visitor from Mongolia
