- Active balanced interfacing
- Variable High and low cut filters
- Industry standard connectors
- Superb audio separation
- Externally adjustable R and C balance
- Remote controllable
- GPIO interfacing with mixing consoles
The D&R Telephone Hybrid-2 concept originates from many demands for a more sophisticated hybrid with more features.
The Telephone Hybrid-2 is an analog unit with digital control and features like ducking making intelligibility a lot
better in broadcast. A large ring button enables you to to pick up the line from the unit itself or from your mixer when
connected via its GPIO to the telephone Hybrid.
Both levels of receive and send can be adjusted to suit your requirements. Incoming signals can be tailored by the
variable high and low cut signal while talking to people calling the station. A switchable ducking system reduces the
incoming signal while talking to people calling the station.
|
Specifications
|
|
Send
|
|
10k Ohm, electronically balanced
|
|
>40dB
|
|
+26dBu
|
|
+4 dBu
|
|
20Hz – 15kHz (-3dB variable via HC and LC filters)
|
|
XLR type 3 pin female
|
|
40dB
|
|
Receive
|
|
< 50 Ohm, electronically balanced
|
|
>40dB
|
|
+26dBu
|
|
+4 dBu
|
|
250Hz – 4kHz, -3dB ref 1 kHz
|
|
Nominally 600 ohm
|
|
300 ohm to 1500 ohm
|
|
XLR type 3 pin male
|
|
+6dB to –20dB
|
|
General
|
|
Less than 0.1% (0dBu out)
|
|
115v / 230 v AC / 50/60Hz (factory set, NOT do this yourself)
|
|
10VA Maximum
|
|
1 HE front panel: 482x44mm
|
|
Frame: 430x41x175mm (width x height x depth)
|
|
2.2 kg net excl packing
|
Recently purchased 2 Hybrid 2 telephone interfaces for use on a security project where a control room required speech to a number of remote sites, the transmission was via a VOIP gateway, the Hybrid did an excellant job of interfacing the systems. Great seperation of channels and easy to setup.
Adrian from
Good product
THAI from Vietnam