For radio stations searching for the 'creme de la crème', look no further. By combining analogue and digital techniques, the Digilog delivers excellent spectral cleanliness and optimum stereo separation.
- Micro Computer Controlled
- More than 50dB Separation
- Linear Phase DSP 15khz Brickwall Filtering
- MPX Filtering
- Balanced Audio Inputs
- Switchable Pre-Emphasis
- Switchable Baseband Clipping
- Stereo/Mono Switch
- Audio Input Level Controls
- Socketed Connecters
- High Grade Low Noise Op-Amps
- Switched Mode Power Supply
- Black Oxide High Grade PCB
The Digilog is a microcomputer controlled stereo encoder that combines the best of analogue and digital techniques for fantastic performance. Designed for optimum stereo separation and excellent spectral cleanliness this encoder will provide that extra performance for radio stations who want something a little special.
Audio baseband filtering combined with the latest digital techniques and post MPX filtering make this unit easily conform to even the most stringent broadcast regulations. And because the energy from the encoder is in the right places you will gain extra loudness inside your bandwidth limits.
The ultra low distortion pilot tone will allow excellent compatibility with subcarrier services such as the Radio Data System (RDS) High quality components and printed circuit board will ensure you have 24 hour operation for years and years.
The internal power regulator allows the encoder to be run from 8 to 18 volts but still employ a split rail power supply for maximum dynamic range. Balanced input chips are onboard as standard allowing balanced output professional mixing desks and audio processors to be connected to the encoder. The encoder will function with any composite/mulitplex/mono transmitter/exciter. Supplied with a comprehensive 12 page manual.
| Specifications |
| -10dB - +24dB for 75 kHz deviation |
| >60dB |
| 10k |
| 0,50 and 75 uS |
| Microprocessor Generated (oversampled) |
| 19kHz +/- 2 Hz |
| Microprocessor Generated (oversampled) |
| (BNC) 0dB |
| >40dB at 19kHz |
| on or off |
| >60dBr |
| >160 kHz |
| >60dB (20hz-15khz) |
| 8-15V 300mA |
Works really well straight out of the box.
Vern from New Zealand
